[Q43-Q64] Get up-to-date Real Exam Questions for ISA-IEC-62443 UPDATED [2025]

Application whitelisting (AWL) is a technique that allows only authorized applications to run on a system, and blocks any unauthorized or malicious code from executing. AWL is one of the most effective methods for preventing malware infections and reducing the attack surface of a system. AWL can be implemented at different levels, such as the operating system, the network, or the application itself. AWL is especially useful forindustrial automation and control systems (IACS), which often run on legacy or proprietary platforms that are not compatible with traditional antivirus software or other security solutions. AWL can also help protect IACS from zero-day attacks, which exploit unknown vulnerabilities that have not been patched or detected by security vendors. AWL is recommended by the ISA/IEC 62443 standards as a key component of malicious code protection for IACS. According to the standards, AWL should be applied to all IACS components that support it, and should be configured and maintained according to the security policies and procedures of the organization. AWL should also be complemented by other security measures, such as network segmentation, zones and conduits, and patch management, to provide a defense-in-depth approach to IACS security. References:
* ISA/IEC 62443-3-3:2013, System security requirements and security levels, Section 5.2.3.41
* ISA/IEC 62443-2-1:2010, Establishing an industrial automation and control systems security program, Section 4.3.3.6.42
* ISA/IEC 62443-4-2:2019, Technical security requirements for IACS components, Section 4.2.3.43
* ISA/IEC 62443-3-2:2020, Security risk assessment for system design, Section 7.3.3.44
* ISA/IEC 62443-4-1:2018, Product development requirements, Section 5.2.3.45

A recommended default rule for IACS firewalls is to block all traffic by default, and then allow only the necessary and authorized traffic based on the security policy and the zone and conduit model. This is also known as the principle of least privilege, which means granting the minimum access required for a legitimate purpose. Blocking all traffic by default provides a higher level of security and reduces the attack surface of the IACS network. The other choices are not recommended default rules for IACS firewalls, as they may expose the IACS network to unnecessary risks. Allowing all traffic by default would defeat the purpose of a firewall, as it would not filter any malicious or unwanted traffic. Allowing IACS devices to access the Internet would expose them to potential cyber threats, such as malware, phishing, or denial-of-service attacks. Allowing traffic directly from the IACS network to the enterprise network would bypass the demilitarized zone (DMZ), which is a buffer zone that isolates the IACS network from the enterprise network and hosts services that need to communicate between them. References:
* ISA/IEC 62443 Standards to Secure Your Industrial Control System training course1
* ISA/IEC 62443 Cybersecurity Fundamentals Specialist Study Guide2
* Using the ISA/IEC 62443 Standard to Secure Your Control Systems3

According to the ISA/IEC 62443-1-1 standard, an industrial automation and control system (IACS) is defined as a collection of personnel, hardware, and software that can affect or influence the safe, secure, and reliable operation of an industrial process. The hardware and software components of an IACS include the control system, which is the combination of control devices, networks, and applications that perform the control functions for the industrial process. The control system may consist of various types of devices, such as distributed control systems (DCS), programmable logic controllers (PLC), supervisory control and data acquisition (SCADA) systems, human-machine interfaces (HMI), remote terminal units (RTU), intelligent electronic devices (IED), sensors, actuators, and other field devices. The control system may also use commercial off-the-shelf (COTS) software and hardware, such as operating systems, databases, firewalls, routers, switches, and servers, to support the control functions and communication.
References:
* ISA/IEC 62443-1-1:2009, Security for industrial automation and control systems – Part 1-1:
Terminology, concepts and models, Clause 3.2.11
* ISA/IEC 62443-2-1:2010, Security for industrial automation and control systems – Part 2-1: Establishing an industrial automation and control systems security program, Clause 3.2.12

In cybersecurity, a demilitarized zone (DMZ) refers to a physical or logical subnetwork that contains and exposes an organization’s external-facing services to an untrusted network, typically the internet. The main characteristic of a DMZ is that it acts as a buffer zone between the public internet and the private network.
This allows for internet access through the firewall while keeping the internal network secure. Internet-facing servers are placed in the DMZ so that they are separated from the rest of the internal network. By doing so, if a server in the DMZ is compromised, the attacker would not have direct access to the internal network. This architecture is commonly used to host services such as web servers, mail servers, and FTP servers. Choice C is the most closely associated with the deployment of a DMZ as it allows for regulated and monitored internet access through a firewall.

RS232 is a physical layer standard for serial communication between two or more devices. It defines the electrical characteristics, timing, and pinout of connectors for serial data transmission. RS232 is widely used in industrial communication devices, such as PLCs, measuring instruments, and network servers. RS232 allows only one master and one slave to communicate on each line, and operates in a full duplex mode. RS232 haslower transmission speed, shorter maximum cable length, and larger voltage swing than later standards such as RS422 and RS485123 References: 1: Basics of RS232, RS422, and RS485 Serial Communication 2: RS-232 – Wikipedia 3: RS232 Serial Communication Protocol: Basics, Working & Specifications

ISO/IEC 15408, also known as the Common Criteria for Information Technology Security Evaluation, is an international standard that provides a framework for evaluating the security of IT products and systems. The purpose of the standard is to define a common set of requirements for the security functions and assurance measures of IT products and systems, and to establish a common methodology for conducting security evaluations. The standard allows users to specify their security needs and expectations in a Security Target (ST), which may be based on one or more Protection Profiles (PPs)that define security requirements for a class of products or systems. Vendors can then implement or claim compliance with the ST or PPs, and have their products or systems evaluated by independent testing laboratories against the security criteria defined in the standard. The standard also defines a scale of Evaluation Assurance Levels (EALs) that indicate the degree of confidence in the security of the evaluated product or system. The standard is intended to facilitate the development, procurement, and use of secure IT products and systems, and to promote the recognition and acceptance of evaluation results across different countries and regions. References:
* ISO/IEC 15408-1:2009 – Common Criteria Evaluation for IT Security – Nemko1
* Common Criteria – Wikipedia2
* ISO/IEC Standard 15408 – ENISA3

PROFINET is the implementation of PROFIBUS over Ethernet for non-safety-related communications. It is a standard for industrial Ethernet that enables real-time data exchange between automation devices, controllers, and higher-level systems. PROFINET uses standard Ethernet hardware and software, but adds a thin software layer that allows deterministic and fast communication. PROFINET supports different communication profiles for different applications, such as motion control, process automation, and functional safety. PROFINET is compatible with PROFIBUS, and allows seamless integration of existing PROFIBUS devices and networks123 References: 1: What is PROFINET? – PI North America 2: PROFINET – Wikipedia 3: PROFINET Technology and Application – System Description

According to the ISA/IEC 62443 Cybersecurity Fundamentals Specialist resources, patches are software updates that fix bugs, vulnerabilities, or improve performance of a system. Patches are classified into three categories based on their urgency and impact: low, medium, and high. Low priority patches are those that have minimal or no impact on the system functionality or security, and can be applied at the next scheduled maintenance. Medium priority patches are those that have moderate impact on the system functionality or security, and should be applied within a reasonable time frame, such as three months. High priority patches are those that have significant or critical impact on the system functionality or security, and should be applied as soon as possible, preferably at the first unscheduled outage. Applying patches in a timely manner is a best practice for maintaining the security and reliability of an industrial automation and control system (IACS).
References:
* ISA/IEC 62443 Cybersecurity Fundamentals Specialist Study Guide, Section 4.3.2, Patch Management
* ISA/IEC 62443-2-1:2009, Security for industrial automation and control systems – Part 2-1: Establishing an industrial automation and control systems security program, Clause 5.3.2.2, Patch management
* ISA/IEC 62443-3-3:2013, Security for industrial automation and control systems – Part 3-3: System security requirements and security levels, Clause 4.3.3.6.2, Patch management

The primary responsibility of the network layer of the Open Systems Interconnection (OSI) model is to forward packets, including routing through intermediate routers. The network layer is the third layer from the bottom of the OSI model, and it is responsible for maintaining the quality of the data and passing and transmitting it from its source to its destination. The network layer also assigns logical addresses to devices, such as IP addresses, and uses various routing algorithms to determine the best path for the packets to travel.
The network layer operates on packets, which are units of data that contain the source and destination addresses, as well as the payload. The network layer forwards packets from one node to another, using routers to switch packets between different networks. The network layer also handles host-to-host delivery, which means that it ensures that the packets reach the correct destination host.
The other choices are not correct because:
* B. Gives transparent transfer of data between end users. This is the responsibility of the transport layer, which is the fourth layer from the bottom of the OSI model. The transport layer provides reliable and error-free data transfer between end users, using protocols such as TCP and UDP. The transport layer operates on segments, which are units of data that contain the source and destination port numbers, as well as the payload. The transport layer also handles flow control, congestion control, and multiplexing.
* C. Provides the rules for framing, converting electrical signals to data. This is the responsibility of the data link layer, which is the second layer from the bottom of the OSI model. The data link layer provides the means for transferring data between adjacent nodes on a network, using protocols such as Ethernet and WiFi. The data link layer operates on frames, which are units of data that contain the source and destination MAC addresses, as well as the payload. The data link layer also handles error detection, error correction, and media access control.
* D. Handles the physics of getting a message from one device to another. This is the responsibility of the physical layer, which is the lowest layer of the OSI model. The physical layer provides the means for transmitting bits over a physical medium, such as copper wire, fiber optic cable, or radio waves. The physical layer operates on bits, which are the smallest units of data that can be either 0 or 1. The physical layer also handles modulation, demodulation, encoding, decoding, and synchronization.
References:
* The OSI Model – The 7 Layers of Networking Explained in Plain English1
* Network Layer in OSI Model2
* OSI model3

The ISASecure certification program, aligned with the ISA/IEC 62443 standards, defines three distinct security levels that categorize the robustness of industrial control systems against known cybersecurity threats.
These levels are designed to provide a scalable approach to securing industrial automation and control systems, with each level offering a higher degree of security. The levels are typically identified as SL1 (Security Level 1), SL2 (Security Level 2), and SL3 (Security Level 3), each addressing increasingly stringent security capabilities and resilience against cyber attacks.

According to the ISA/IEC 62443-3-2 standard, implementing countermeasures is one of the steps in the security risk assessment for system design. The standard defines a comprehensive set of engineering measures to guide organizations through the process of assessing the risk of a particular industrial automation and control system (IACS) and identifying and applying security countermeasures to reduce that risk to tolerable levels. The standard recommends the following steps for implementing countermeasures:
* Establish the risk tolerance: This step involves determining the acceptable level of risk for the organization and the system under consideration, based on the business objectives, legal and regulatory requirements, and stakeholder expectations. The risk tolerance can be expressed as a target security level (SL-T) for each zone or conduit in the system.
* Select common countermeasures: This step involves selecting the appropriate security countermeasures for each zone or conduit, based on the SL-T and the existing security level (SL-A) of the system. The standard provides a list of common countermeasures for each security level, covering the domains of physical security, network security, system security, and application security. The selected countermeasures should be documented and justified in the security risk assessment report. References:
ISA/IEC 62443 Cybersecurity Series Designated as IEC Horizontal Standards, Cybersecurity Risk Assessment According to ISA/IEC 62443-3-2

Security Levels (SLs) are a way of expressing the security performance of an industrial automation and control system (IACS) or its components. SLs are broken down into three types: target, capability, and achieved1.
* Target SL is the level of security performance that is required for a system or component to protect against a specific threat scenario. The target SL is determined by conducting a risk assessment that considers the likelihood and impact of potential security incidents1.
* Capability SL is the level of security performance that a system or component can provide based on its design and implementation. The capability SL is determined by evaluating the security functions and features of the system or component against a set of security requirements1.
* Achieved SL is the level of security performance that a system or component actually provides in its operational environment. The achieved SL is determined by verifying that the system or component is properly installed, configured, maintained, and monitored1.
References: ISA/IEC 62443 Standards to Secure Your Industrial Control System, page 3-4.

One of the reasons for the increase in attacks on IACS is the availability of information and tools that can be used to exploit vulnerabilities in these systems. The Internet provides a platform for hackers, researchers, and activists to share their knowledge and techniques for compromising IACS. Some examples of such information and tools are:
* Stuxnet: A sophisticated malware that targeted the Iranian nuclear program in 2010. It exploited four zero-day vulnerabilities in Windows and Siemens software to infect and manipulate the programmable logic controllers (PLCs) that controlled the centrifuges. Stuxnet was widely analyzed and reported by the media and security experts, and its source code was leaked online1.
* Metasploit: A popular penetration testing framework that contains modules for exploiting various IACS components and protocols. For instance, Metasploit includes modules for attacking Modbus, DNP3, OPC, and Siemens S7 devices2.
* Shodan: A search engine that allows users to find devices connected to the Internet, such as webcams, routers, printers, and IACS components. Shodan can reveal the location, model, firmware, and
* configuration of these devices, which can be used by attackers to identify potential targets and vulnerabilities3.
* ICS-CERT: A website that provides alerts, advisories, and reports on IACS security issues and incidents. ICS-CERT also publishes vulnerability notes and mitigation recommendations for various IACS products and vendors4. These sources of information and tools can be useful for legitimate purposes, such as security testing, research, and education, but they can also be misused by malicious actors who want to disrupt, damage, or steal from IACS. Therefore, IACS owners and operators should be aware of the threats and risks posed by the Internet and implement appropriate security measures to protect their systems. References:
* The increase in attacks on Industrial Automation and Control Systems (IACS) can be attributed to several factors, including: A.Use of proprietary communications protocols:These can pose security risks because they may not have been designed with security in mind and are often not as well-tested against security threats as more standard protocols. C.Knowledge of exploits and tools readily available on the Internet:The availability of information about vulnerabilities and exploits on the internet has made it easier for attackers to target IACS.
* The other options, B and D, are incorrect because: B. The move towards commercial off-the-shelf (COTS) systems, protocols, and networks actually increases risk because these systems are more likely to be known and targeted by attackers, compared to proprietary systems which might benefit from security through obscurity. D. There is actually an increase in risk with more personnel with system knowledge because it enlarges the attack surface – each individual with system knowledge can potentially become a vector for an attack, either maliciously or accidentally.

According to the ISA/IEC 62443 standard, the connections between security zones are called conduits. A conduit is defined as a logical or physical grouping of communication channels connecting two or more zones that share common security requirements. A conduit can be used to control and monitor the data flow between zones, and to apply security measures such as encryption, authentication, filtering, or logging. A conduit can also be used to isolate zones from each other in case of a security breach or incident. A conduit can be implemented using various technologies, such as firewalls, routers, switches, cables, or wireless links.
However, these technologies are not synonymous with conduits, as they are only components of a conduit. A firewall, for example, can be used to create multiple conduits between different zones, or to protect a single zone fromexternal threats. Therefore, the other options (firewalls, tunnels, and pathways) are not correct names for the connections between security zones. References:
* ISA/IEC 62443-3-2:2016 – Security for industrial automation and control systems – Part 3-2: Security risk assessment and system design1
* ISA/IEC 62443-3-3:2013 – Security for industrial automation and control systems – Part 3-3: System security requirements and security levels2
* Zones and Conduits | Tofino Industrial Security Solution3
* Key Concepts of ISA/IEC 62443: Zones & Security Levels | Dragos4