90 Exam Questions for HPE6-A72 Updated Versions With Test Engine [Q46-Q65]

90 Exam Questions for HPE6-A72 Updated Versions With Test Engine

Pass HPE6-A72 Exam with Updated HPE6-A72 Exam Dumps PDF 2022

For more info about Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam

Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam

Understanding functional and technical aspects of Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam Design for Stacking

The following will be discussed in HP HPE6-A72 exam dumps:

• Tracking Layer 2 traffic: Multicast, and Unicast
• Describe and design HPE StoreServ integration with StoreOnce (RMC-V/RMC-X/Veeam)
• Categorized Data Plane and Shared Link Aggregation
• Vertical Switching Framework Link
• Intro to Stacking technology
• Vertical Switching Framework member IDs and port numbers
• Vertical Switching Framework Link failure
• Centralized authority and administration plane
• Vertical Switching Framework specifications
• Vertical Switching Framework Arrangement
• Vertical Switching Framework
• Describe HPE StoreServ and RMC solution integration with File Persona
• Describe how HPE storage solutions optimize back-end storage capacity utilization and front-end storage services to hosts and applications
• Control, Management, and Data Planes

How to Prepare for Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam

Preparation Guide for Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam

Introduction for Aruba Certified Switching Associate (HP HPE6-A72) Professional Exam

This guide provides a step by step framework of the Aruba Certified Switching Associate (HP HPE6-A72) Professional course exam including a broad array of essentials of the test, the exam design, themes, test complexities and readiness techniques, and the intended interest group profile. Thus, we prepare various Aruba Certified Switching Associate (HP HPE6-A72) PROFESSIONAL exam dumps as we understand understudy determinations. Our content, helps candidates’ total assessments.
Aruba Networks, is a California-based wireless networking subdivision of Hewlett Packard Enterprise company.

The Aruba Certified Switching Associate (HP HPE6-A72) certification verifies that a person has the required skills to configure and operate modern, open standards-based networking solutions for small-to-midsized businesses (SMBs) & campus networks. This certification verifies skills on the networking fundamentals of ArubaOS-CX switches and file structures including VLANs, secure access, repetition technologies, and Aruba’s Virtual Switching Framework (VSF). It confirms the person’s ability to deploy Aruba wired networking technologies. This certification also proves that one knows how to configure, administer and monitor network deployments with the Aruba management solutions.

The certification proves the skills on the networking fundamentals of ArubaOS CX switches and file structures including VLANs, secure access, redundancy technologies, and Aruba’s Virtual Switching Framework (VSF). It proves the candidate’s expertise to deploy Aruba wired networking technologies. This certification also confirms that the candidate knows how to configure, administer and monitor network deployments with the Aruba management solutions.

• Develop your profession as a Aruba Certified Switching Associate who knows how to apply Aruba Switching Fundamentals for Mobility.
• Upgrade yourself as an advanced team member who contributes to the design, deployment and management of modern Aruba Mobile First Network solutions.
• Heighten your job satisfaction with an Aruba technical certification.

Ideal applicants for Aruba certification are networking IT professionals with a minimum of six months experience in deploying small-to-medium scale network solutions based on Aruba products and technologies.

The contents of HP HPE6-A72 practice exam and HP HPE6-A72 practice exams will help candidates to prepare for this exam.

After finishing this course, the candidate will be able to:

• Execute Aruba WLAN safe employee and guest solutions
• Control and monitor Aruba solutions
• Provide AP Provisioning

NO.46 Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)

 write memory

 save

 copy config config1 config startup-config

 copy running-config startup-config

 copy running-config checkpoint boot-config

NO.47 What are two OSPF attributes within the hello messages that must match to successfully establish neighbor relationships? (Choose two.)

 Router ID

 Priority

 Hello and Dead intervals

 Area ID

 Process ID

NO.48 Refer to the exhibit.

Switch-1 is not the root bridge. The ports shown are all the connected pointtopoint interfaces. What Role (hidden by the blue rectangle) will be assigned to the Lag 1 interface?

 Alternate

 Backup

 Root

 Designated

NO.49 Which two port characteristics must match between LAG interfaces? (Choose two.)

 Port number

 Duplex

 Member ID

 Media type

 Chassis number

NO.50 What are two mechanisms supported on AOS-CX 6300 switches used in Multi-active Detection to determine the status of the Primary member? (Choose two.)

 Management interface split detection

 Peer switch-based detection

 Loopback keepalives

 ARP-based

 BFD

NO.51 Refer to the exhibit.

What configuration is needed in order for “show LLDP configuration” to show this output?

 none; LLDP is enabled by default on Aruba switches

 configuring LLDP both globally and on the interfaces

 enabling LLDP on the interfaces only

 configuring LLDP globally only

NO.52 Core(config)# user admin password
Core(config)# interface mgmt
Core(config-if-mgmt)# ip static 10.254.16.89/22
Core(config-if-mgmt)# default-gateway 10.254.19.129
Core(config)# ssh server vrf mgmt
Core(config)# https-server vrf mgmt
You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings.
Which two steps are missing? (Choose two.)

 Core(config)# https-server rest access-mode read-write

 Core(config-if-mgmt)# no shutdown

 Core(config-if-mgmt)# no tftp-server

 Core(config-if-mgmt)# enable

 Core(config)# https-server rest access-mode read-only

NO.53 Which statement is correct regarding powering an Aruba Access Point?

 PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.

 Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.

 PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.

 Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.

NO.54 What are two available options as part of a DHCP offer message? (Choose two.)

 SSID

 DNS server IP

 Subnet Mask

 LLDP-MED

 VLANID

NO.55 Refer to the exhibit.

What command (output shown above) gives the optics serial number and part number information?

 show interface physical

 show interface transceiver

 show inventory

 show interface optics

NO.56 Which Ethernet port combination does the Aruba 5400R ZL2 switch series support?

 10/100 Megabit Ethernet, Gigabit Ethernet, and 100 Gigabit Ethernet

 Gigabit Ethernet, 25 Gigabit Ethernet, and 40 Gigabit Ethernet

 10/100 Megabit Ethernet, Gigabit Ethernet, 25 Gigabit Ethernet, and 100 Gigabit Ethernet

 10/100 Megabit Ethernet, Gigabit Ethernet, and 40 Gigabit Ethernet

NO.57 Which two options are the Layer 3 Routing protocols? (Choose two.)

 BGP

 LLDP

 OSPF

 MPLS

 802.3ad

NO.58 The following command is issued:
Switch# checkpoint rollback start
What is the result?

 The command will fail because rollback commands must be issued from global-config mode.

 The switch will revert the running-configuration to the checkpoint called ‘start1 without a reboot.

 The command will fail because it is incomplete.

 The switch will use the checkpoint ‘rollback1 as the starting configuration on next reboot.

NO.59 Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?

 Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.

 Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.

 Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.

 Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.

NO.60 Which port or ports should be allowed through a firewall so that an AOS-CX switch can act as an SNMP Agent?

 UDP 1812 and UDP 1813

 UDP 161

 TCP 443

 UDP 162

NO.61 Match the terms to the correct layer of the OSI model.

NO.62 Refer to the exhibit.

The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?

 The command page

 The command terminal length 30

 The command more

 The command less

NO.63 Which command can be used to find the serial number of an Aruba OS-CX switch?

 The command inventory

 The command version

 The command show running-configuration

 The command show system

NO.64 Which option correctly describes a WAN network?

 a group of computer resources that communicates between geographically separate location

 the connection between two separate buildings in the same campus

 a network of devices over long distances but limited to within a single ISP

 compute resources that are networked locally over wireless

NO.65 Refer to the exhibit.

The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports.
Which ports carry VLAN 1 traffic?

 1/1/8, 1/1/10, 1/1/5-1/1/24

 1/1/1-1/1/28

 1/1/1-1/1/24

 1/1/8-1/1/10, 1/1/5-1/1/28

 Loading …

HPE6-A72 Exam Dumps – Free Demo & 365 Day Updates: https://www.braindumpspass.com/HP/HPE6-A72-practice-exam-dumps.html