Ultimate Guide to Prepare Free Cisco 350-601 Exam Questions & Answer [Q138-Q160]

NO.138 Refer to the exhibit.

An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)

NO.139 An engineer must configure the HSRP protocol to implement redundancy using two Cisco Nexus Series Switches In addition, the HSRP must meet these requirements
* Switch1 must retain the primary role if switch2 goes offline
* Switch1 must retain the primary role until normal conditions are restored.
* Switch1 and switch2 must ensure that the routing tables are converged before taking the active role
* switch2 must retain the primary role if the default gateway is not reachable Drag and drop the configuration commands from the right to the left to meet the requirements. The commands are used more than once Not all commands are used

NO.140 A QoS policy on Cisco UCS must meet these requirements:
* No-drop class must be configured.
* Jumbo frames must be enabled without fragmentation.
Which configuration must be implemented to mast these conditions?

NO.141 Refer to the exhibit.

What is a characteristic of the UUID in the service profile presented.

NO.142 An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration? (Choose two)

NO.143 An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.

NO.144 The EPLD update of the supervisor module has been scheduled for several cisco MDS 9000 switches. What will be the impact of the update?

NO.145 A network engineer needs a tool to automate the provisioning of Cisco UCS Service Profiles. The administrator has limited programming knowledge but is skilled with scripting tools. The tool must include existing support for Cisco UCS configuration. Additionally, the administrator will eventually use the solution to manage Cisco UCS C-Series Rack Servers.
Which tool meets these requirements?

NO.146 A network engineer needs to configure system logging on the MDS switch. The messages must be displayed with the severity level of “warning” and above. For security reasons the users must be logged out of the console after 5 minutes of inactivity Which configuration must be applied to meet these requirements?

NO.147 Refer to the exhibit. An engineer must implement an Application Performance Monitoring (APM) for the production servers on the Cisco Nexus 93180 Series Switch-based infrastructure in datacenter 1. The APM solution must meet these requirements:
– It must copy all inbound and outbound production traffic.
– It must support real-time telemetry.
Which configuration must be used on datacenter 1 switches to meet these objectives?

NO.148 A network administrator is creating a custom Django self-service portal that runs on a Linux server to automate the creation of new VLANs on Cisco UCS Manager Which feature must De installed and configured on the server?

NO.149 Refer to the exhibit. An engineer is configuring a VSAN on the network.
Which option must be selected to create the VSAN?

NO.150 Refer to the exhibit.

Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)

NO.151 What is an advantage of NAS compared to SAN?

NO.152 What is a characteristic of the install all command on the cisco Nexus series switch?

NO.153 Refer to the exhibit. The STP priority of N7K-1 and N7K-2 are the lowest in the network.

Which statement describes STP on the vPC?

NO.154 A network architect wants to propose a scalable network monitoring solution in which data is repeatedly acquired from network devices. The solution must use a push model and provide close to realtime access to operational data.
Which technology must be used to meet these requirements?

NO.155 An engineer must configure a monitoring solution for a Cisco Nexus 9000 Series Switch based data center. The solution must provide real-time insight into the network health with subscription-based monitoring. The monitoring must be initiated from the client side, and the data must be sent via encryption. Which configuration steps complete the configuration?

NO.156 A DNS server with IP address 192.168.1.1 is deployed in a data center. A network engineer must configure a Cisco UCS Fabric Interconnect to use this DNS.
Which configuration should be applied?

NO.157 An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the Cisco IMC actual boot order so it is different from the configured boot order. Which setting accomplishes this goal?

NO.158 Which product includes prebuilt templates that can be used to customize fabric deployments?

NO.159 A network engineer must create a script to quickly verify IP reachability for multiple hosts using ping from the Cisco NX-OS switches. The script should use the management VRF and exit the shell after execution Which script should be used to achieve this objective?

NO.160 A network architect wants to propose a scalable network monitoring solution in which data is repeatedly acquired from network devices. The solution must use a push model and provide close to realtime access to operational data. Which technology must be used to meet these requirements?